Strona główna / Szablony / Domek cętkowanego kotka squishy

Zwierzęta

Domek cętkowanego kotka squishy

Szablony i instrukcja są zaktualizowane. Korzystaj z angielskiej instrukcji obrazkowej. Wybierz A4 lub Letter i drukuj w skali 100%.

Domek cętkowanego kotka squishy
Pobieranie

Pobierz pakiet szablonów

Szablony i instrukcja są zaktualizowane. Korzystaj z angielskiej instrukcji obrazkowej. Wybierz A4 lub Letter i drukuj w skali 100%.

Wybierz format papieru

Szablony i instrukcja montażu w PDF. Obrazy są dostępne osobno poniżej.
Ten materiał jest dostępny po angielsku. ZIP zawiera angielskie pliki.

Pojedyncze pliki
Trudność: ŚredniCzas: 20–40 minMotyw: ZwierzętaPapier: A4 / US Letter · 1 pliki szablonuPliki: PNG / PDF / ZIPSkala druku: 100% / rzeczywisty rozmiarModel 3D

Obejrzyj pliki przed drukowaniem

Obejrzyj szablony kolorowe, kolorowanki i instrukcje. Drukuj PDF A4 lub US Letter w rzeczywistym rozmiarze.

Szablony i instrukcja są zaktualizowane. Korzystaj z angielskiej instrukcji obrazkowej. Wybierz A4 lub Letter i drukuj w skali 100%.

Kliknij obraz, aby go powiększyć. Wybierz PDF w formacie dostępnym dla danego pliku.

Od pliku do papierowego modelu

Szablony są bezpłatne i nie wymagają konta. Do druku używaj plików PDF, a do podglądu PNG.

Którego pliku użyć?

  1. 1
    Pobierz ZIP szablonu

    Ten materiał jest dostępny po angielsku. ZIP zawiera angielskie pliki.

  2. 2
    PDF — Do druku

    Drukuj PDF w skali 100%, w rzeczywistym rozmiarze i podanym formacie papieru. Wyłącz dopasowanie do strony i sprawdź wymiary przed wycinaniem.

  3. 3
    Szablon kolorowy

    Obejrzyj szablony kolorowe, kolorowanki i instrukcje. Drukuj PDF A4 lub US Letter w rzeczywistym rozmiarze.

  4. 4
    Szablon do kolorowania

    Wydrukuj kontury, pokoloruj płaskie arkusze, a następnie wytnij i złóż model. Użyj wszystkich arkuszy tej samej wersji.

Ten materiał jest dostępny po angielsku. ZIP zawiera angielskie pliki.

Domek cętkowanego kotka squishy: Assembly guide 1 / 3 · English

Assembly guide 1 / 3 · English

Poniższe instrukcje są po polsku. Napisy na starszych szablonach i instrukcje obrazkowe pozostają po angielsku: kieruj się tymi samymi oznaczeniami części.

Sprawdź przed drukowaniem i składaniem

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Podstawowe kroki

  1. STEP 1

    80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

  2. STEP 2

    Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

  3. STEP 3

    Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

  4. STEP 4

    Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

  5. STEP 5

    Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

  6. STEP 6

    Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

  7. STEP 7

    Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Gdy coś się nie udaje

Assembly guide

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Domek cętkowanego kotka squishy: Instrukcja składania

Drukuj PDF w skali 100%, w rzeczywistym rozmiarze i podanym formacie papieru. Wyłącz dopasowanie do strony i sprawdź wymiary przed wycinaniem.

1

80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

2

Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

3

Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

4

Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

5

Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

6

Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

7

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Sprawdź przed drukowaniem i składaniem

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Najczęstsze pytania

PARTS

Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both.

CLEAR TAPE · OUTSIDE

Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Drukować A4 czy US Letter?

Wybierz plik pasujący do papieru i skalę 100%. Nie mieszaj formatów.

Czy mogę najpierw pokolorować?

Tak, koloruj przed wycinaniem, oklejaniem i składaniem.

Czy instrukcja obrazkowa jest po polsku?

W starszych modelach pozostaje po angielsku. Instrukcje tekstowe na tej stronie są po polsku.

Podgląd obrazu