Home / Modelli / Casetta del gattino maculato squishy

Animali

Casetta del gattino maculato squishy

Modelli e guida aggiornati. Segui la guida illustrata in inglese. Scegli A4 o Letter e stampa al 100%.

Casetta del gattino maculato squishy
Download

Scarica il pacchetto di modelli

Modelli e guida aggiornati. Segui la guida illustrata in inglese. Scegli A4 o Letter e stampa al 100%.

Scegli il formato della carta

Modelli e istruzioni di montaggio in PDF. Le immagini sono disponibili separatamente qui sotto.
Questo materiale è disponibile in inglese. Lo ZIP contiene i file in inglese.

Scarica singoli file
Difficoltà: MediaTempo: 20–40 minTema: AnimaliCarta: A4 / US Letter · 1 file del modelloFile: PNG / PDF / ZIPScala di stampa: 100% / dimensioni effettiveModello 3D

Guarda i file prima di stampare

Guarda modelli a colori, da colorare e guide. Stampa il PDF A4 o US Letter nelle dimensioni effettive.

Modelli e guida aggiornati. Segui la guida illustrata in inglese. Scegli A4 o Letter e stampa al 100%.

Tocca un'immagine per ingrandirla. Scegli il PDF nel formato disponibile per ogni file.

Dal file al modello di carta

I modelli sono gratuiti e non serve un account. Usa i PDF per stampare e i PNG per l'anteprima.

Quale file usare?

  1. 1
    Scarica lo ZIP del modello

    Questo materiale è disponibile in inglese. Lo ZIP contiene i file in inglese.

  2. 2
    PDF — Da stampare

    Stampa il PDF al 100%, nelle dimensioni effettive e nel formato indicato. Disattiva l'adattamento alla pagina e controlla le misure prima di tagliare.

  3. 3
    Modello a colori

    Guarda modelli a colori, da colorare e guide. Stampa il PDF A4 o US Letter nelle dimensioni effettive.

  4. 4
    Modello da colorare

    Stampa i contorni, colora sul foglio ancora piatto e poi ritaglia e monta. Usa tutti i fogli della stessa versione.

Questo materiale è disponibile in inglese. Lo ZIP contiene i file in inglese.

Casetta del gattino maculato squishy: Assembly guide 1 / 3 · English

Assembly guide 1 / 3 · English

Le istruzioni qui sotto sono in italiano. Le scritte sui vecchi modelli e le guide illustrate restano in inglese: segui le stesse lettere delle parti.

Controlla prima di stampare e montare

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Passaggi di base

  1. STEP 1

    80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

  2. STEP 2

    Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

  3. STEP 3

    Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

  4. STEP 4

    Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

  5. STEP 5

    Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

  6. STEP 6

    Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

  7. STEP 7

    Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Se qualcosa non funziona

Assembly guide

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Casetta del gattino maculato squishy: Istruzioni di montaggio

Stampa il PDF al 100%, nelle dimensioni effettive e nel formato indicato. Disattiva l'adattamento alla pagina e controlla le misure prima di tagliare.

1

80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

2

Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

3

Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

4

Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

5

Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

6

Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

7

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Controlla prima di stampare e montare

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Domande frequenti

PARTS

Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both.

CLEAR TAPE · OUTSIDE

Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

PDF A4 o US Letter?

Scegli il file adatto alla carta e stampa al 100%. Non mescolare formati.

Posso colorare prima?

Sì, colora prima di tagliare, rivestire e montare.

La guida illustrata è in italiano?

Per i vecchi modelli è ancora in inglese. Le istruzioni scritte di questa pagina sono in italiano.

Anteprima immagine