Startseite / Vorlagen / Kätzchenhaus-Squishy mit orange gefleckter Katze

Tiere

Kätzchenhaus-Squishy mit orange gefleckter Katze

Vorlagen und Anleitung wurden aktualisiert. Folge der englischen Bildanleitung. Wähle A4 oder Letter und drucke mit 100 %.

Kätzchenhaus-Squishy mit orange gefleckter Katze
Downloads

Vorlagenpaket herunterladen

Vorlagen und Anleitung wurden aktualisiert. Folge der englischen Bildanleitung. Wähle A4 oder Letter und drucke mit 100 %.

Papierformat auswählen

Vorlagen und Bauanleitung als PDF. Die Bilder sind unten separat erhältlich.
Dieses Material ist auf Englisch verfügbar. Die ZIP-Datei enthält die englischen Dateien.

Einzelne Dateien
Schwierigkeit: MittelZeit: 20–40 Min.Thema: TierePapier: A4 / US Letter · 1 VorlagendateiDateien: PNG / PDF / ZIPDruckmaßstab: 100 % / Tatsächliche Größe3D-Vorlage

Vorlagendateien ansehen

Sieh dir Farbvorlagen, Ausmalbilder und Anleitungen an. Drucke die A4- oder US-Letter-PDF mit tatsächlicher Größe.

Vorlagen und Anleitung wurden aktualisiert. Folge der englischen Bildanleitung. Wähle A4 oder Letter und drucke mit 100 %.

Klicke zum Vergrößern auf ein Bild. Wähle bei jeder Datei die PDF im angebotenen Papierformat.

Von der Datei zum Bastelprojekt

Die Vorlagen sind kostenlos und ohne Konto verfügbar. Nutze PDFs zum Drucken und PNGs zur Vorschau.

Welche Datei brauche ich?

  1. 1
    Vorlagen-ZIP

    Dieses Material ist auf Englisch verfügbar. Die ZIP-Datei enthält die englischen Dateien.

  2. 2
    Druck-PDF

    Zum Drucken im passenden Papierformat und Maßstab.

  3. 3
    Farb-PNG

    Sieh dir die Farbvorlage am Bildschirm an, bevor du die PDF herunterlädst.

  4. 4
    Ausmal-PNG

    Prüfe die Umrissvorlage, die du selbst gestalten möchtest.

Dieses Material ist auf Englisch verfügbar. Die ZIP-Datei enthält die englischen Dateien.

Kätzchenhaus-Squishy mit orange gefleckter Katze: Assembly guide 1 / 3 · English

Assembly guide 1 / 3 · English

Die Bastelschritte unten sind auf Deutsch. Beschriftungen und die ursprüngliche Bildanleitung sind weiterhin auf Englisch; orientiere dich an denselben Buchstaben auf den Bauteilen.

Druck und Zusammenbau prüfen

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Die grundlegende Reihenfolge

  1. STEP 1

    80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

  2. STEP 2

    Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

  3. STEP 3

    Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

  4. STEP 4

    Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

  5. STEP 5

    Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

  6. STEP 6

    Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

  7. STEP 7

    Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Wenn etwas nicht klappt

Assembly guide

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Kätzchenhaus-Squishy mit orange gefleckter Katze: Bastelanleitung

Drucke die PDF mit 100 % / Tatsächliche Größe auf dem angegebenen Papierformat. Nicht an die Seite anpassen. Prüfe vorhandene Kontrollmaße vor dem Schneiden.

1

80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

2

Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

3

Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

4

Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

5

Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

6

Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

7

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Druck und Zusammenbau prüfen

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Häufige Fragen

PARTS

Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both.

CLEAR TAPE · OUTSIDE

Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

A4 oder US Letter drucken?

Wähle die PDF passend zum Druckerpapier und drucke mit 100 %. Mische innerhalb eines Modells keine Papierformate.

Kann ich die Vorlage zuerst ausmalen?

Ja. Wähle die Ausmalversion und male vor dem Schneiden, Bekleben und Zusammenbauen aus.

Ist die Bildanleitung auf Deutsch?

Bei älteren Vorlagen ist die Bildanleitung noch auf Englisch. Die Bastelschritte auf dieser Seite sind auf Deutsch.

Bildvorschau