Accueil / Modèles / Maison du chaton tacheté squishy

Animaux

Maison du chaton tacheté squishy

Modèles et guide mis à jour. Suivez le guide illustré en anglais. Choisissez A4 ou Letter et imprimez à 100 %.

Maison du chaton tacheté squishy
Téléchargements

Télécharger le pack de modèles

Modèles et guide mis à jour. Suivez le guide illustré en anglais. Choisissez A4 ou Letter et imprimez à 100 %.

Choisissez le format du papier

Modèles et instructions de montage en PDF. Les images sont disponibles séparément ci-dessous.
Ce matériel est disponible en anglais. Le ZIP contient les fichiers en anglais.

Fichiers individuels
Difficulté: MoyenneDurée: 20–40 minThème: AnimauxPapier: A4 / US Letter · 1 fichiers du modèleFichiers: PNG / PDF / ZIPÉchelle d'impression: 100 % / taille réelleModèle 3D

Consulte les fichiers avant d'imprimer

Consulte les modèles couleur, les coloriages et les guides. Imprime le PDF A4 ou US Letter à taille réelle.

Modèles et guide mis à jour. Suivez le guide illustré en anglais. Choisissez A4 ou Letter et imprimez à 100 %.

Clique sur une image pour l'agrandir. Choisis le PDF dans le format proposé pour chaque fichier.

Du fichier au modèle en papier

Les modèles sont gratuits, sans compte. Utilise les PDF pour imprimer et les PNG pour les aperçus.

Quel fichier utiliser ?

  1. 1
    Télécharger le ZIP du modèle

    Ce matériel est disponible en anglais. Le ZIP contient les fichiers en anglais.

  2. 2
    PDF — À imprimer

    Imprime le PDF à 100 %, à taille réelle, sur le format indiqué. Désactive l'ajustement à la page et vérifie les repères de mesure avant de découper.

  3. 3
    Modèle en couleur

    Consulte les modèles couleur, les coloriages et les guides. Imprime le PDF A4 ou US Letter à taille réelle.

  4. 4
    Modèle à colorier

    Imprime les contours, colorie les feuilles à plat, puis découpe et assemble. Utilise toutes les feuilles de la même version.

Ce matériel est disponible en anglais. Le ZIP contient les fichiers en anglais.

Maison du chaton tacheté squishy: Assembly guide 1 / 3 · English

Assembly guide 1 / 3 · English

Les instructions ci-dessous sont en français. Les inscriptions sur les anciens modèles et leurs guides illustrés restent en anglais : suis les mêmes lettres de pièces.

À vérifier avant l'impression et le montage

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Étapes de base

  1. STEP 1

    80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

  2. STEP 2

    Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

  3. STEP 3

    Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

  4. STEP 4

    Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

  5. STEP 5

    Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

  6. STEP 6

    Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

  7. STEP 7

    Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

En cas de difficulté

Assembly guide

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

Maison du chaton tacheté squishy: Instructions de montage

Imprime le PDF à 100 %, à taille réelle, sur le format indiqué. Désactive l'ajustement à la page et vérifie les repères de mesure avant de découper.

1

80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

2

Cut A, R and K. The doorway is printed artwork: do not cut it out. K is a standing paper decoration. Fold only the dashed lines; keep both gables in the wall planes.

3

Fold the four walls of A into a rectangular ring. Match the free wall edges at the free corner and tape outside. Keep the attached floor hanging open.

4

Swing the floor up and tape its three free edges from below. Fold R along its center ridge and test it on both gables, then lift it off again. Do not glue the roof yet.

5

Add loose filling through the open roof. Keep both gables and all wall rims clear. Do not overfill; R must rest on the gables without pressure.

6

Place R over the two gables. Match the ridge and both eaves. Tape both eaves and all four sloping gable edges from outside. The roof has no hidden tabs.

7

Fold the 6 mm foot of K forward. Stand K against the printed door. Bridge each side edge of K to the house front with a short piece of clear tape on the outside, as highlighted. The foot rests on the table; do not tape it to the table. K stays flat and unfilled.

À vérifier avant l'impression et le montage

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Questions fréquentes

PARTS

Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both.

CLEAR TAPE · OUTSIDE

Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

PDF A4 ou US Letter ?

Choisis le fichier adapté au papier et imprime à 100 %. Ne mélange pas les formats.

Puis-je colorier avant ?

Oui, colorie avant de découper, recouvrir et assembler.

Le guide illustré est-il en français ?

Pour les anciens modèles, il reste en anglais. Les instructions écrites sur cette page sont en français.

Aperçu de l'image