Home / Templates / Pink and purple paw

Printable

Pink and purple paw Paper Squishy

Pink and purple paw. Digitally checked trial. Assembly, seam strength and rebound still await a physical test. Images are paper-craft renderings.

Pink and purple paw paper squishy preview
Download

Get the template pack

Choose ONE template: colour or colour-in. Print at 100% and measure the 50 mm bar.

Choose your paper size

Template and guide
English

Individual file downloads
Difficulty: Medium Theme: Animal Paper: A4 / US Letter File: PDF / WebP / ZIP Print scale: 100% 3D template
Printable templates

Assembly guide

Illustrations show the intended finished shape.

What you'll need

  • Paper, scissors, ruler, clear tape and loose pieces of dry tissue.

Assembly overview

  1. Put the two white backs together. Keep the printed pads outside. Match all four toes, the three dips and both marks on the straight heel. The pads stay printed on the shell.
  2. Begin just outside the left heel mark. Stick half a short strip to F, wrap it over both edges and press the other half onto B. Work towards the left outer toe. Keep the marked heel free.
  3. Wrap each rounded toe in short strips. At a dip, use narrow pieces. Run one down the first side and another up the next, overlapping at the bottom. Press the tape into the dip on both faces.
  4. Continue around the remaining toes and all three dips, overlapping the strips. Follow the right side down to the other heel mark. Keep the space between the two marks open.
  5. Gently part the two paper layers only between the two short marks. Check that the 34 mm filling opening is clear and that the rest of the edge is joined.
  6. Part the two marked edges. Feed in small wisps of dry tissue. Stop while the shell still gives easily; keep the opening clear.
  7. Bring the edges back together. Fold short overlapping strips from F to B across the opening, covering both ends. Press the tape on both faces and check the whole seam.

Image preview