Home / Templates / Tide Plaza Skatepark

Printable

Tide Plaza Skatepark

Build two curved ramps with reinforced 172 × 104 mm decks for a 150 mm paper skateboard, a mosaic plaza and a movable ledge.

Tide Plaza Skatepark preview
Download

Get the template pack

Choose colour or colouring pages. Print single-sided at 100%. Check the 50 mm bar. Colour before assembly.

Choose your paper size

Template and guide
English

Individual file downloads
Difficulty: Medium Theme: 3D Paper: A4 / US Letter File: PDF / WebP / ZIP Print scale: 100% 3D template
Printable templates

Assembly guide

Illustrations show the intended finished shape.

What you'll need

  • Paper, scissors, ruler and clear tape.
Assembly notes

Color template 1/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Color template 2/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Color template 3/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Color template 4/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Color template 5/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Coloring template 1/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Coloring template 2/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Coloring template 3/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Coloring template 4/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly notes

Coloring template 5/5

Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.

Assembly overview

  1. Choose 160–200 gsm cardstock. Cut A, B, P, C, D and E from all FIVE sheets of one version. A and B are ramps, D and E are their supports. The corner marks on the decks are parking guides. Cut only the outside outlines.
  2. Lay D print up. Hold the 56 mm centre strip flat. Fold both 36 mm sides up at right angles, then fold the two hatched 10 mm tabs OUT until level. The centre strip is the foot that will touch the table.
  3. Lay A print DOWN. Turn D over and centre it on the white back of the long parking rectangle, tabs touching A. Leave 4 mm at each end and 14 mm from each outer tab edge to the side fold. Tape both long tab edges to A; press along their length.
  4. Turn A print up. Fold its two outer side walls DOWN 90°. Fold the narrow 6 mm strip at the back UP 90° as a stop. On a flat table, the support foot and both side walls must touch together. Adjust the folds until the deck sits level without rocking.
  5. At the last dashed line, tip the riding surface down. Gently curl it between your fingers to follow the two curved side edges. The low lip should meet the table flat. Keep the riding surface smooth.
  6. From the high end, tape both curved seams a little at a time. Put half of each short strip on the riding surface and half on the wall. Alternate sides and overlap the strips. Repeat steps 2–6 for B + E.
  7. Fold the four walls of C down around its long top. Bring adjacent vertical edges together and tape the four corners from the outside. Place the open underside on the plaza.
  8. Lay P flat. Set A and B at opposite short ends, low lips facing IN and aligned between the two marks on each end of P. Tape underneath each joint. Stand C along one side so the centre stays clear. If an edge lifts, smooth a small strip over it.
  9. Park your existing 150 × 50 mm paper skateboard lengthwise between the four painted corners on either 172 × 104 mm deck. Keep all four wheels on the flat. Centred, the nose and tail each have 11 mm to spare. Check for rocking before letting go. Guide the board down by hand or trace the route with two fingers.

Image preview