Home / Templates / Little mouse paper squishy

Printable

Little mouse Paper Squishy

Two mirrored mouse panels with a printed pink tail. Untested trial edition. Assembly and squeeze recovery have not been physically tested.

Little mouse paper squishy paper squishy preview
Download

Get the template pack

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Choose your paper size

Template and guide
English

Individual file downloads
Difficulty: Easy Theme: Animal Paper: A4 / US Letter File: PDF / WebP / ZIP Print scale: 100% 3D template
Printable templates

Assembly guide

Illustrations show the intended finished shape.

What you'll need

  • Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.
Assembly notes

Color template 1/1

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Assembly notes

Coloring template 1/1

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Assembly overview

  1. Put B print-side down and A print-side up. Dry-fit nose N, ear E and rump R, then move A aside. The ear and curled tail are printed on the panels.
  2. Place a little loose tissue in the middle of B's blank back. Nudge a little toward the ear root and clear the whole rim. Replace A and align N, E and R again.
  3. Tape half of each strip to A, turn the other half over the edge and press onto B. Use short strips around the nose and ear notch. Close the last 32 mm between S and Z after clearing the belly edge.
  4. Check the whole seam, including the notch by the ear. Gently press the body and observe how the paper recovers.

Image preview