Home / Templates / Lake fish paper squishy

Printable

Lake fish Paper Squishy

Taped paper fish with a continuous fan tail and two side bands. Untested trial edition. Assembly and squeeze recovery have not been physically tested.

Lake fish paper squishy paper squishy preview
Download

Get the template pack

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Choose your paper size

Template and guide
English

Individual file downloads
Difficulty: Medium Theme: Animal Paper: A4 / US Letter File: PDF / WebP / ZIP Print scale: 100% 3D template
Printable templates

Assembly guide

Illustrations show the intended finished shape.

What you'll need

  • Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.
Assembly notes

Color template 1/2

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Assembly notes

Color template 2/2

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Assembly notes

Coloring template 1/2

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Assembly notes

Coloring template 2/2

Choose one set: colour or colouring. Print single-sided at 100% and measure the 50 mm bar. Use printer paper, clear tape, loose tissue, scissors and a ruler. Colour first. Tape the printed faces lightly; leave fold lines free. Copy letters onto the blank backs, then cut only the solid outer edges.

Assembly overview

  1. Butt the V ends of T and H together. Tape across the outside. Bend both strips into a ring and tape D to D. T goes round the tail and H round the head.
  2. Lay B print-side down. Match D (back), U and L (tail roots), V (belly) and N (nose). Support the inside while taping from B's printed underside up the outer wall. With A aside, add loose tissue inside; keep the rim clear.
  3. Lay A print-side up and align the letters. Bridge the edge from A onto the outside wall. Try short 8 mm strips at the tail roots. At each outer tail corner, follow each side separately and slightly overlap the tape ends.
  4. Leave the 36 mm belly arc between S and Z until last. Move tissue away from the edge, press both edges together and bridge them with short pieces of tape. Check the tail corners and belly for lifted edges.

Image preview