Home / Templates / Glass of orange juice

Printable

Glass of orange juice Paper Squishy

Glass of orange juice. Digitally checked trial. Assembly, seam strength and rebound still await a physical test. Images are paper-craft renderings.

Glass of orange juice paper squishy preview
Download

Get the template pack

Choose ONE template: colour or colour-in. Print at 100% and measure the 50 mm bar.

Choose your paper size

Template and guide
English

Individual file downloads
Difficulty: Medium Theme: Food Paper: A4 / US Letter File: PDF / WebP / ZIP Print scale: 100% 3D template
Printable templates

Assembly guide

Illustrations show the intended finished shape.

What you'll need

  • Paper, scissors, ruler, clear tape and loose pieces of dry tissue.

Assembly overview

  1. Lay W1 and W2 print-side up with the thick, pale base edges at the bottom. Butt W1’s right short edge to W2’s left short edge and bridge the entire seam with clear tape.
  2. Curve W1 and W2 into a tube with the orange slices outside. Butt the free short edges together and tape that vertical seam. Both ends are open.
  3. Place T on the top rim, orange slice facing out. Match its chevron to the upper W1 chevron. Tack the disc with four short strips spaced around the circle.
  4. Overlap short strips from the coloured disc down onto the wall around the entire top rim. Support the joint from the open base as you press.
  5. Turn the glass over. Look through the open base at the white back of T. Find the chevron and both short marks at the lower edge of W1.
  6. Set B on the rim, print-side out. Align its centre chevron and both ticks with W1. Tape from B onto the wall around the rim except for the 32 mm arc between the ticks.
  7. Lift B just at the gap. Feed small pieces of dry tissue through the opening with your fingers. Leave room for the walls to flex. Tuck in all tissue before closing.
  8. Lower B back onto W1. Wrap short, overlapping pieces of tape from B down the wall across all 32 mm, including both ends of the previous tape.
  9. Stand the glass on B with the juice surface on top. Press over both rims and the two upright seams; check that all tissue stays inside.

Image preview