Home / Templates / Pink and blue slime bucket

Printable

Pink and blue slime bucket Paper Squishy

Pink and blue slime bucket. Digitally checked trial. Assembly, seam strength and rebound still await a physical test. Images are paper-craft renderings.

Pink and blue slime bucket paper squishy preview
Download

Get the template pack

Choose ONE template: colour or colour-in. Print at 100% and measure the 50 mm bar.

Choose your paper size

Template and guide
English

Individual file downloads
Difficulty: Medium Theme: Everyday Paper: A4 / US Letter File: PDF / WebP / ZIP Print scale: 100% 3D template
Printable templates

Assembly guide

Illustrations show the intended finished shape.

What you'll need

  • Paper, scissors, ruler, clear tape and loose pieces of dry tissue.

Assembly overview

  1. Lay W1 and W2 print-side up, labels upright. Butt the right short edge of W1 against the left short edge of W2. Bridge the joint on the printed side with clear tape, top to bottom. Keep the paper edges side by side.
  2. Curve the band with the castle outside. Bring the free short edges together and tape that seam from top to bottom. The two ends of the cylinder are still open.
  3. Place T on the upper rim with the two colours facing out. Match its chevron to the upper chevron on W1. Hold it with four short strips spaced around the circle.
  4. Overlap short strips from the coloured disc down onto the wall around the entire top rim. Support the joint from the open base as you press.
  5. Turn the bucket over. Set B on the rim, print-side out. Align its centre chevron and both ticks with W1. Tape from B onto the wall around the rim except for the 32 mm arc between the ticks.
  6. Lift B just at the gap. Feed small pieces of dry tissue through the opening with your fingers. Leave room for the walls to flex. Tuck in all tissue before closing.
  7. Seat the last arc of B against W1. Bridge the 32 mm gap with short strips folded from disc to wall, overlapping the earlier tape at both ends. Press the strips on both surfaces, then turn the bucket upright.

Image preview