Home / Templates / Black and white bunny phone

Printable

Black and white bunny phone Paper Squishy

Black and white bunny phone. Digitally checked trial. Assembly, seam strength and rebound still await a physical test. Images are paper-craft renderings.

Black and white bunny phone paper squishy preview
Download

Get the template pack

Choose ONE template: colour or colour-in. Print at 100% and measure the 50 mm bar.

Choose your paper size

Template and guide
English

Individual file downloads
Difficulty: Medium Theme: Everyday Paper: A4 / US Letter File: PDF / WebP / ZIP Print scale: 100% 3D template
Printable templates

Assembly guide

Illustrations show the intended finished shape.

What you'll need

  • Paper, scissors, ruler, clear tape and loose pieces of dry tissue.

Assembly overview

  1. Turn N white side up. Use a ruler to crease its four dashed inner lines. Raise the four walls towards you to make right angles, with the print outside.
  2. Bring two neighbouring walls edge to edge. Support the corner from inside. Wrap a short piece of tape across the outside corner, half on each wall.
  3. Overlap strips from the base to the rim. Repeat at the other three corners. Check all four seams with the top still open.
  4. Lower T onto N, print up. Align its four corners. The edge with the two short marks faces you. Start with one strip at the opposite edge. Match both marks on T to the marks on N.
  5. Fold overlapping strips from T onto the outside walls along all four edges. Leave the 30 mm between the two marks open. Lift this part gently.
  6. Part the two marked edges. Feed in small wisps of dry tissue. Stop while the shell still gives easily; keep the opening clear.
  7. Tuck the tissue inside. Bring T back down flush with the wall. Bridge the 30 mm gap with short overlapping strips from T onto the wall. Press the tape ends flat.

Image preview