Ready
Finished cover
See the finished project before you print. This helps you check the shape, colors, and final look.
Drink 3D
Soda Bottle Paper Squishy
A generic lemon soda bottle paper squishy with a printable bottle dieline, coloring page, and ZIP download.
Download
Download template ZIPReadyTemplate asset files
Preview PNG files first, then use the PDF files for printing or the ZIP when you want the full template pack.
Preview the template assets
Start with the ZIP pack if you want every file, or inspect the cover, color template, coloring template, and assembly steps before downloading only the PNG you need.
Ready
Color template
Use the color template when you want the quickest print, cut, tape, and stuff workflow.
Ready
Coloring template
Use the coloring version when kids want to decorate the squishy before taping and cutting.
Ready
3D steps
Follow the assembly view to understand the order: print, cut, pre-fold, tape, stuff, and close.
Make it work
Printable workflow for this squishy
Use this section as the craft-table checklist: choose the right file, print it cleanly, assemble in the right order, and fix common problems before the final seal.
Which file should I use?
- 1 Finished cover
Use this first to confirm the shape, colors, and finished look before spending paper.
- 2 Color template
Best for a fast project. Print, tape, cut, stuff, and seal.
- 3 Coloring template
Best for kids or classrooms. Color while the sheet is flat, then tape both sides.
- 4 Assembly steps
Open this while making the template so the folding and stuffing order stays clear.
- 5 ZIP asset pack
Best if you want every image and PDF for one template in a single download.
Want everything? Download this template's ZIP pack from the download panel.
Steps ready
Soda Bottle
3D templates need pre-folding before stuffing. If the shape twists, remove stuffing and re-crease the folds.
Print settings that prevent bad cuts
- Use 100% scale, actual size, or no scaling. Do not use fit-to-page if it changes the dieline.
- Print one test page first and check that tabs, fold lines, and margins are not clipped.
- Use the PNG template at 100% scale, then check that the full outline and tabs fit inside your printer margins.
- Plain printer paper is usually easier to squish than thick cardstock.
5-step assembly order
- Preview
Look at the finished cover and template preview so you know which panels become the visible front.
- Color
If using the coloring version, color before cutting. Keep heavy marker ink away from fold lines.
- Protect
Cover the front and back with overlapping clear tape. Rub the tape flat before cutting.
- Cut and fold
Cut outside the solid lines and pre-fold dashed lines gently with a ruler edge.
- Stuff and close
Add a small amount of soft stuffing, test the squeeze, then close the last seam with short tape strips.
Quick fixes
Edges keep opening
Use shorter tape pieces around curves, then press each seam from the center outward.
Template feels too hard
Open the last seam and remove stuffing. Paper squishies need air space to bounce back.
Art looks wrinkled
Tape the flat sheet before cutting and avoid stretching tape over curved corners.
Panels do not align
Reprint at 100% scale and cut just outside the black outline instead of inside it.
Make this template work in real life
Use the printable as a craft object: preview the asset, print at actual size, color before cutting, tape both sides, then add only enough stuffing for a soft squeeze.
1 
Print the soda bottle template at 100% scale and keep the front, back, cap band, and side strip together.
Start with a simple outline, print at 100% scale, and keep the design inside the safe page margins.
2 
Color the bubbles and fruit label while the sheet is flat, without adding real beverage logos.
Color while the paper is still flat. Large marker areas are easier to smooth before tape is added.
3 
Tape both sides, cut the bottle shoulders carefully, and reinforce the cap and bottom tabs.
Cover both sides with overlapping strips of clear tape so the paper resists tearing and smudging.
4 
Stuff lightly so the bottle stays tall and readable, then close the side seam with short tape strips.
Use small pieces of tissue, clean grocery bag, or soft scrap paper. Too much stuffing makes seams pop.
Print and Assembly Checks
- Keep print scale at 100% so front, back, tabs, and fold lines stay aligned.
- Color while the sheet is still flat, then tape both sides before cutting.
- Use short tape strips around tight curves instead of forcing one long strip to bend.
- If the squishy feels hard, remove a little stuffing before sealing the final edge.
FAQ
Does this copy a cola or soda brand?
No. It is a generic lemon soda craft with original label art and no readable brand name.
Is it good for drink squishy pages?
Yes. It adds a bottle shape beside boba and milk-box templates, which broadens drink printable coverage.
Related Guides
- How to Make a Paper Squishy - Beginner guide
- Best Materials for Paper Squishies - Materials
- Mochi Squishy Guide - Mini toys
- Squishy Stress Ball Guide - Stress balls
- Cute Squishies by Theme - Ideas
People Also Made
Related printable pages keep users moving through the library instead of bouncing after one download.
