Sandy pyramid Paper Squishy

What you'll need

• Print the color OR coloring sheet at 100% / Actual Size. Check the 50 mm line. Cut A and B on solid outer lines, keeping every tab. Use 90–120 gsm paper, scissors, glue, clear tape and a little soft filling.

Assembly overview

1. Print and cut. Print the color OR coloring sheet at 100% / Actual Size. Check the 50 mm line. Cut A and B on solid outer lines, keeping every tab. Use 90–120 gsm paper, scissors, glue, clear tape and a little soft filling.
2. Pre-fold every dashed line. Fold the three lines from the tip to the base corners. Fold the four bottom tabs inward. Pre-fold the narrow side tab. The printed faces stay outside; dashed lines are folds, never cuts.
3. Close the side seam. Apply a thin glue layer to the PRINTED side of the narrow tab. Bring the opposite free edge over it and stop at its dashed root. Press the seam from the still-open bottom. Let it dry before filling.
4. Fill through the open base. Turn the pyramid upside down. Keep the four bottom tabs folded inward. Add a small amount of soft filling through the square opening. Keep filling below the tab contact areas; do not pack tightly.
5. Attach the square base. Spread glue on the outward-facing surfaces of the four folded bottom tabs. Place B with its printed face outside and align all four edges. Press gently; support the tabs from the filling underneath.
6. Seal and shape. After the glue dries, bridge each base edge with a narrow strip of clear tape. Keep the point and folds neat. The finished square base is 70 × 70 mm; the vertical height is 65 mm. Squeeze gently.