Color — top layer + butter
A4 portrait / Letter landscape. Print at 100% and check the 50 mm square.
Make three golden kawaii pancakes with syrup, a smiling bottom layer and a folded butter topper. Download three color sheets, three matching coloring sheets, a guide and the complete ZIP.
Printable Draft: choose A4 portrait or US Letter landscape cutting PDFs. Print at Actual Size (100%), never Fit to Page, and measure both sides of the 50 mm square. Guides are portrait and not to scale. Physical print/build testing is still required.
Choose all three color sheets or all three coloring sheets. The butter net is on the top-layer sheet. Letter keeps the same-sized pieces in a landscape layout. Guide illustrations are not cutting templates.
A4 portrait / Letter landscape. Print at 100% and check the 50 mm square.
A4 portrait / Letter landscape. Print at 100% and check the 50 mm square.
A4 portrait / Letter landscape. Print at 100% and check the 50 mm square.
A4 portrait / Letter landscape. Print at 100% and check the 50 mm square.
A4 portrait / Letter landscape. Print at 100% and check the 50 mm square.
A4 portrait / Letter landscape. Print at 100% and check the 50 mm square.
Follow this six-step guide. Illustrations are not to scale; cut from the template sheets.
Printable Draft. Geometry and exported dimensions have been checked digitally, but no physical print or assembly test has been recorded. Each pancake uses two 95 mm circles and a 16 mm wall; the set has 13 cut pieces. Trial-build one set before group use.
Three color and three matching coloring cutting sheets, a finished reference, English / Brazilian Portuguese / Mexican Spanish guides, A4 and US Letter PDFs, SVG cutting masters, and one ZIP.
Yes: 95 mm circles, 16 mm walls and the 50 mm square retain their physical dimensions. A4 cutting pages are portrait; Letter cutting pages are rearranged in landscape, not scaled down. Use the matching paper at Actual Size (100%).
No. This is a Printable Draft with digital geometry/export checks only. Measure the printed square and trial-build one set before group use.
Leave the three ! tabs at the lower edge of rear strip B unglued while attaching the lower circle. Fill through this temporary opening, then seal the tabs. Do not cut an extra hole.