Ana sayfa / Şablonlar / Gevrek kutusu squishy

Yiyecekler

Gevrek kutusu squishy

Şablonlar ve kılavuz güncellendi. İngilizce resimli kılavuzu izleyin. A4 veya Letter seçin ve %100 ölçekte yazdırın.

Gevrek kutusu squishy
İndir

Şablon paketini indir

Şablonlar ve kılavuz güncellendi. İngilizce resimli kılavuzu izleyin. A4 veya Letter seçin ve %100 ölçekte yazdırın.

Kâğıt boyutunu seçin

Şablonlar ve montaj talimatları PDF biçimindedir. Görseller aşağıda ayrı olarak sunulur.
Bu materyal İngilizce olarak mevcuttur. ZIP, İngilizce dosyaları içerir.

Tek tek dosyalar
Zorluk: Orta Süre: 20–40 dk Tema: YiyeceklerKâğıt: A4 / US Letter · 1 şablon dosyasıDosyalar: PNG / PDF / ZIPBaskı ölçeği: %100 / gerçek boyut3D model

Yazdırmadan önce dosyaları incele

Renkli şablonları, boyama sayfalarını ve kılavuzları incele. A4 veya US Letter PDF dosyasını gerçek boyutta yazdır.

Şablonlar ve kılavuz güncellendi. İngilizce resimli kılavuzu izleyin. A4 veya Letter seçin ve %100 ölçekte yazdırın.

Büyütmek için görsele tıkla. Her dosya için sunulan kâğıt boyutunda PDF seç.

Mevcut

Assembly guide 1 / 3 · English

Bu modelin resimli kılavuzu İngilizcedir. Aşağıdaki modele özgü Türkçe montaj adımlarını izleyin; parça harflerini ve işaretleri mevcut görsellerle eşleştirin.

Mevcut

Assembly guide 2 / 3 · English

Bu modelin resimli kılavuzu İngilizcedir. Aşağıdaki modele özgü Türkçe montaj adımlarını izleyin; parça harflerini ve işaretleri mevcut görsellerle eşleştirin.

Mevcut

Assembly guide 3 / 3 · English

Bu modelin resimli kılavuzu İngilizcedir. Aşağıdaki modele özgü Türkçe montaj adımlarını izleyin; parça harflerini ve işaretleri mevcut görsellerle eşleştirin.

Dosyadan kâğıt modele

Hangi dosyayı kullanmalıyım?

  1. 1
    Şablon ZIP dosyasını indir

    Bu materyal İngilizce olarak mevcuttur. ZIP, İngilizce dosyaları içerir.

  2. 2
    PDF indir

    PDF dosyasını belirtilen kâğıt boyutunda %100 / gerçek boyutta yazdır. Sayfaya sığdır seçeneğini kapat ve kesmeden önce ölçü işaretlerini kontrol et.

  3. 3
    Renkli şablon

    Renkli şablonu ekranda incele; yazdırmak için PDF kullan.

  4. 4
    Boyama şablonu

    Kâğıt düzken boya, ardından kes ve birleştir. Aynı sürümün bütün gerekli sayfalarını kullan.

Gevrek kutusu squishy: Assembly guide 1 / 3 · English

Assembly guide 1 / 3 · English

Bu modelin resimli kılavuzu İngilizcedir. Aşağıdaki modele özgü Türkçe montaj adımlarını izleyin; parça harflerini ve işaretleri mevcut görsellerle eşleştirin.

Baskı ve montaj öncesi kontrol

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Temel adımlar

  1. STEP 1

    80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

  2. STEP 2

    Cut the single piece A and pre-fold every dashed line. The long strip contains all four walls. The two large end panels stay attached to the front.

  3. STEP 3

    Fold the three vertical wall lines to form a rectangle. Bring the two free long edges together and tape the outside corner. Leave both end panels unfolded.

  4. STEP 4

    Swing the bottom panel up against the walls. Tape its three free edges from outside; its fourth edge is the attached fold. Turn the box upright only after the bottom is closed.

  5. STEP 5

    Fill through the fully open top. Keep the box walls straight and leave room under the lid. The top panel must close without squeezing the filling.

  6. STEP 6

    Fold the top panel onto the three wall rims. Match the corners and tape all three free top edges. No extra lid or hidden back piece is needed.

  7. STEP 7

    Press the side seam and all six free end edges. Check that every corner is closed. The finished box is 75 × 32 × 100 mm at 100% print size.

Sorun giderme

Assembly guide

Press the side seam and all six free end edges. Check that every corner is closed. The finished box is 75 × 32 × 100 mm at 100% print size.

Gevrek kutusu squishy: Türkçe montaj adımları

PDF dosyasını belirtilen kâğıt boyutunda %100 / gerçek boyutta yazdır. Sayfaya sığdır seçeneğini kapat ve kesmeden önce ölçü işaretlerini kontrol et.

1

80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

2

Cut the single piece A and pre-fold every dashed line. The long strip contains all four walls. The two large end panels stay attached to the front.

3

Fold the three vertical wall lines to form a rectangle. Bring the two free long edges together and tape the outside corner. Leave both end panels unfolded.

4

Swing the bottom panel up against the walls. Tape its three free edges from outside; its fourth edge is the attached fold. Turn the box upright only after the bottom is closed.

5

Fill through the fully open top. Keep the box walls straight and leave room under the lid. The top panel must close without squeezing the filling.

6

Fold the top panel onto the three wall rims. Match the corners and tape all three free top edges. No extra lid or hidden back piece is needed.

7

Press the side seam and all six free end edges. Check that every corner is closed. The finished box is 75 × 32 × 100 mm at 100% print size.

Baskı ve montaj öncesi kontrol

  • 80–100 gsm paper, scissors, clear tape and a little soft filling. Print one size at 100%. Copy part letters to the back before cutting. Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both. Cut solid outlines. Fold dashed lines only. Optional: cover the printed side with clear tape before cutting. Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

Sık sorulan sorular

PARTS

Measure the 50 mm line before cutting. Use either the color or coloring sheets, not both.

CLEAR TAPE · OUTSIDE

Edges meet; do not overlap. Bridge each seam with clear tape on the outside. Use short pieces around curves and corners.

A4 mü, US Letter mı?

Yazıcı kâğıdına uygun dosyayı seç ve %100 yazdır. Sayfalar arasında kâğıt boyutlarını karıştırma.

Önce boyayabilir miyim?

Evet. Kesmeden, bantlamadan ve birleştirmeden önce boya.

Resimli kılavuz Türkçe mi?

Sayfada modele özgü Türkçe montaj adımları bulunur. Mevcut resimli kılavuz İngilizcedir; parça harflerini ve işaretleri görsellerle eşleştirin.

İndir

Dosyaları tek tek indir

PDF ve kâğıt boyutunu seç. %100 / Gerçek boyutta yazdır. Görseller önizleme içindir.

Kâğıt boyutunu seçin

Orijinal çözünürlükte görsel paketi

Önizleme ve yeniden kullanım için orijinal görsel dosyaları. Doğru boyutta yazdırmak için uygun PDF paketini kullanın.

Tüm görseller için numaralandırılmış bölümlerin tamamını indirin. Her ZIP ayrı olarak açılır.

Orijinal çözünürlükte görsel paketi · Bölüm 1/2 · English · 7,5 MB ↓

Orijinal çözünürlükte görsel paketi · Bölüm 2/2 · English · 6,7 MB ↓

Görsel önizleme